Three versions of a flask with a cork on top with the clay texture. I made it available as a vase or container for storage of stuff ..... or for RPG just without it being hollowed out. The full has two versions.

Free for download, hope you guys liked it.

Flask (as vase/container or as RPG prop)

flask vase.stl

Christmas is almost at our doorstep so Santa will be on his way. Print him and his sled here.

STL for a sculptuire 13cm in height, adjust size at your convenience.

Santa on his sled

Santa on sled final.stl

My children just love unicorns....and our youngest lost hers during our trip so I promised to make a new one for her.

I uploaded the stl for the sculpture 15cm in height and the print is done with a Creality K1 max at fastest default print setting.

Unicorn sculpture

Unicorn final.stl

This dice tower is designed into tow pieces that fit and includes spiral stairs, allowing the dice roll (not slip) as they go down.  The top provides a tray at which the dice can be stored until usewith a hole to drop the dice onto the stairs. The stairs are just under 20 cm in size. 

Dice Tower Castle Stairs

Dice stairs bottom.stl

Gaming with friends, RPG or boargames and tired of small parts laying around on the table. Dicetower and suitcase part can be used for rolling dice (being a dice tower and a dice tray) and boxes can be used during the game for storage of miniatures,  coins, tokens, dice...... you choose which setup you want, print the number of boxes from the STLs as indicated and they fit the suitcase as the picture indicates.

The three potential setups to store pieces in or to use during the game (all include the dice tower) are: 
Setup 1 includes deeper medium boxes and smaller boxes 
Setup 2 includes more shallow medium size boxes and smaller boxes 
Setup 3 includes one big storage box
All STLs for the boxes are available in this purchase.

Note that the suitcase is designed as a 20cm suitcase to fit all in. If you resize, resize all other parts the same ratio.

Suitcase for boardgaming or RPG 

Bottom part suitcase.stl

Statue of a cute little dragon, made for my wife to be used as a companion for her DND character. But you might as well print it bigger to make it a beautiful statue.

It is designed as a stl to be printed as a 15cm height statue. When printed on an FDM printer, it will take approximately 50m/150g filament.

Cute little dragon 

Dragon 15cm height 50m 150g filament print.stl

Central dice tower, disassembles into three pieces for use in a party as central piece. Assembled it has a total height of 16cm.

A fitting dice tray is included with room where the tower should be placed. Version 3 is the optimized version including ribs inside the shaft causing dice movement, planks and ribs under the roof.

STLs include three pieces of the tower and the tray. Tray is saved as STL of 250mm and tower pieces are sized accordingly.

Printing in Creality K1 Max takes 5.5 hours with a total filament use of 53m (160g)

Central dice tower

Central dice tower with dicetray v4 bottom.stl

Bust of Santaclause with built in room for cookies, keys or whatever you want to store inside his head.

Bust was printed using Creality M1 max FDM printer (default 'fast' settings).

Santa box

Kerstman snoepdoos deksel 8000x.stl

Sinterklaas is a childs' friend in Western Europe, this is a bust with the hat, which is a lid.

Bust was printed using Creality M1 max FDM printer (default 'fast' settings).

Sinterklaas box

Sinterklaas snoepdoos bottom 8000.stl

High and low vase designed as if capped from stone. The front part has a stone texture while the vast in the back is smooth. Both STLs of the lower and higher model are included here, up to you to decide which height you need.

High and low stone capped vase 

Stone capped vase high.stl

A flower or plant pot designed in the shape of a planet with several planetary ring with a rocky planetary surface.

Intergalactic planetary vase

Jupiter vase.stl

An old cauldron. Can be used as a vase, Halloween prop,.... what would you use it for?

Old busted cauldron

Cauldron vase.stl

The sculpture portrays a rugged and battle-worn man, his sharp, angular chin accentuated by a coarse, short beard that follows the sharp line of his jaw. His face is marked with scars that hint at a life filled with conflict and hardship.

Bust of battleworn man

Pirate v2.stl

Jar with lit, noting more and nothing less but this one has dragon scales (same lid closure as https://cults3d.com/en/3d-model/tool/generic-jar). Designed initially for storage of DND dice but off course there are a million other things that can be stored in this :-).

Dragonscale jar

Dragon dicebox Bottom.stl

Jar with lit, noting more and nothing less. Designed initially for storage of DND dice but off course there are a million other things that can be stored in this :-). Free for all!

Storage box

Dice storage box body.stl

Dice tray and dice tower easy to assemble and disassemble. The whole will disassemble into three separate pieces. Sides are designed for storage of unused dice. 
STL fils are designed for a dice tray of 26cm in width (for using the biggest dice we have) but can be resized dependent on your printbed.

Attachable dice tower and dice tray

Top section.stl

An elven helmet made from dragon scales. Elven runes scribed on the base and an emerald on the center. Ideally for cosplay or just to look cool...

Elven dragon scale helmet

Elf helmet dragon scales.stl

An elven helmet with furry center. Elven runes scribed on the base and an emerald on the center. Ideally for cosplay or just to look cool...

Elven fur helmet

Elf helmet furry.stl

An elven leather helmet. Elven runes scribed on the base and an emerald on the center. Ideally for cosplay or just to look cool...

Elven leather helmet

Elf helmet leather.stl

Oni mask as a potent emblem of strength and power. This remarkable mask also holds deep associations with the deity of war, Oni-no-Kami.....nevertheless this is not based on a famous Japanese one but rather one created out of my own amusement.

If you like the design, please pop a 'like' for me.

Follow me on Instagram.
https://www.instagram.com/cubicblueprint/

Samurai mask

Samurai mask.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

CubicBlueprint

Achievements

Explorer

Seedling