1. FLOAT lets your flowers defy gravity. This is a digital 3D model set of molds designed to create "FLOAT," a minimalist bent wood wall vase.

2. No Heavy Clamps Required! Traditional wood bending usually requires expensive, heavy woodworking clamps.

3. This set includes a dedicated 3D printable clamp system. You can easily press the wood just by using these printed parts. No professional workshop needed—perfect for beginners and home DIYers.

4. Versatile Styling Its simple, organic curve fits various interior styles:

• Japandi / Scandi Decor: A minimalist accent for dried flowers or a single stem.
• Meditation Altar: Create a serene focal point for your mindfulness space.

5. Bill of Materials (Required Items): To complete this project, you will need to purchase the following separately:

• Test Tube: Outer Diameter 15mm.

　　🛒 Recommended Test Tube on Amazon

• Magnets: Diameter 10mm x Thickness 2mm (2 pieces required).

　　🛒 Recommended Magnets on Amazon

• Wood Veneer: Thickness 0.25mm - 0.5mm.
  • Note: The mold is designed for a total thickness of 2mm. Please adjust the number of veneer layers to achieve exactly 2mm.
• Mounting: A screw or thumbtack for the wall.

6. Processing & Assembly Notes:

• Drilling Required: You need to drill a φ15mm hole in the wood for the test tube.
• Magnet Installation: Magnets are NOT embedded. Please attach two magnets to the finished wood piece referring to the assembly guide.

7. What's Included in This Download:

• 1 x Male Mold STL
• 1 x Female Mold STL
• Clamp System STLs (Assemble these 3 parts to build the clamp):
  • lever.stl
  • pin.stl
  • clamp.stl
• Assembly Guide (PDF)

(Wood, magnets, test tube, and glue are not included.)

8. ⚠️ License & Commercial Use:

• Personal Use: Feel free to make FLOAT vases for yourself or as gifts.
• Commercial Use: Selling finished wooden vases made using these molds is PERMITTED ONLY for active subscribers of my Commercial Plan.
• Prohibition: Selling the physical 3D printed plastic molds/clamps themselves is strictly prohibited.

🖨️ Recommended Print Settings: Since these parts will be under pressure during the bending process, strength is important.

• Material: PLA or PLA+ (Rigid material is best)
• Nozzle: 0.4mm
• Layer Height: 0.2mm
• Wall Line Count: 4 lines (⚠️ Important for strength!)
• Infill: 20% (Gyroid)
• Top/Bottom Layers: 5-6
• Supports: No supports required

Disclaimer: As an Amazon Associate, I earn from qualifying purchases via the links in this description. Thank you for supporting my work!