Inspired by Summerboard's [Foamies](https://summerboard.com/products/foamies), these are aggressive-profile, tunable-compliance footholds for your summerboard. I designed a regular (short) version and a long version assuming preferences might differ. Print in normal 95A TPU with 10% infill to make a very soft, compliant foothold. Or, increase to 20% infill to make a very firm foothold. My current optimal setup is a short foothold on the back for more flexibility in foot position, and a long one in the front for better lock-in. Note: These are a work in progress and may change over time.

Summerboard Soft Footholds (Work in Progress)

OS Foamies V4.stl

This is a case for the corne/crkbd split keyboard which features magnetic attachment between the halves and a low profile design despite capacity for a 1150mAh battery. The design is intended to be printed in its normal orientation rather than upside down, so the columns that receive the case screws extend all the way to the build plate and must be carefully trimmed with flush cutters. These columns are radiused at their base to help prevent them snapping up when removing supports. This case is designed to work with [this lipo cell](https://www.amazon.com/gp/product/B09WR5VNHG) which is only 4mm thick. Also, the case is designed to fit the nice!view rather than a typical OLED screen. The screws for this case are M2.5x8mm with countersunk heads. The battery connectors are [these](https://www.amazon.com/gp/product/B01MXE9IE8), because they are exceedingly flat. The nice!view screens are mounted with two laters (2mm) of [this double-sided tape](https://www.amazon.com/gp/product/B01NALKZZX) to get the right offset between the PCB and the top of the case. The nice!nano controller and the reset button need to be mounted to the bottom of the PCB for everything to fit correctly. Lastly, the stabilizing pillar between the reset button and on/off switch needs to be trimmed to fit with flush cutters depending on whether it touches the microcontroller.

Corne Case - Magnetic, Low Profile, Large Battery

This is a case for the corne/crkbd split keyboard which features magnetic attachment between the halves and a low profile design despite capacity for a 1150mAh battery. The design is intended to be printed in its normal orientation rather than upside down, so the columns that receive the case screws extend all the way to the build plate and must be carefully trimmed with flush cutters. This case is designed to work with [this lipo cell](https://www.amazon.com/gp/product/B09WR5VNHG) which is only 4mm thick. Also, the case is designed to fit the nice!view rather than a typical OLED screen.

Corne Cover Case v12.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Codethetical

Achievements

Explorer

Seedling

Debutant

Summerboard Soft Footholds (Work in Progress)

Corne Case - Magnetic, Low Profile, Large Battery