Select a membership plan

Model is included in this plan
Available now

20% off
Personal
$8.00
/ month
when billed annually
  • Download 8 designs of your choice per month from my full catalogue
  • New products every week
  • Save 70% compared to purchasing models one by one
  • STL files for personal use only.

Your support means the world to me! Thanks for allowing me to keep going on this adventure!

This membership is for personal use only. No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

All designs offered through this membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Model is included in this plan
Available now

20% off
Commercial Seller License
$16.00
/ month
when billed annually
  • Unlimited downloads from my full library of 80+ STLs & new products every week
  • Commercial License to Sell physical 3D prints of my models
  • Access to product photos so you can start selling right away.

In more detail:

Commercial License

  • You can sell physical 3D prints of my designs anywhere you like. (cancelling this subscription would cancel your license to do so)
  • No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

Unlimited access to my full library of STLs

  • Gain access to my full library of STLs
  • At least 4 new designs added every month

TERMS & CONDITIONS:

- Originality in Photography/media:

You'll have access to my original photos/videos so can start selling right away.

However, I'd recommend you'd take pictures of your own prints of my designs.

Your listings will look more unique (and not duplicate of others) and will help you stand out.

- Unique Product Descriptions:

Do not use my original product descriptions.

Your product descriptions must be unique for the same reasons stated above.

- Designer Credit:

Please credit "Charles Regaud" or link back to one of my product pages in your product descriptions. In your Instagram posts of my designs, thanks to mention @charles_regaud somewhere and, as tit-for-tat goes, I'll gladly promote your posts on my profile.

Thanks for supporting my ongoing work!

All designs offered through this Membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Charles R
CharlesRegaud2.8K followers
Follow
CharlesRegaud
CharlesRegaud
|
Image 1 of 7
NINA | Toothbrush cups 3d model
CharlesRegaud
CharlesRegaud
|
Image 1 of 7
NINA | Toothbrush cups 3d model
NINA | Toothbrush cups 3d model
NINA | Toothbrush cups 3d model
NINA | Toothbrush cups 3d model
NINA | Toothbrush cups 3d model
NINA | Toothbrush cups 3d model
NINA | Toothbrush cups 3d model
NINA | Toothbrush cups 3d model

NINA | Toothbrush cups

Subscribe for access starting at $10 USD
Get access to this model and 104+ more

NINA | Toothbrush cups

Over time, the bottoms of toothbrush cups become increasingly dirty, water cannot drain out. And toothbrush heads usually end up touching, which isn’t very hygienic. Toothpaste tubes also tend to fall over, even though they’d be more stable standing upright in a cup.

So I designed a cup that solves all of these problems.

This cup is available in 3 versions: • for 3 brushes • for 4 brushes • for 6 brushes (or a couple of brushes plus razors etc.)

It prints in vase mode and takes between 1h to 1.5h.

DIMENSIONS | Ø110mm x H 110mm

3D PRINT SETTINGS: The cups print upright, in vase mode. The STL files are already oriented properly.

For a 0.8mm nozzle: • activate "vase mode" (spiral vase or spiralize) • Layer height: 0.4 mm/layer • Line width: 1.5mm • Bottom shell layers: 0

For a 0.4mm nozzle: • activate "vase mode" (spiral vase or spiralize) • Layer height: 0.2mm/layer • Line width: 1mm • Bottom shell layers: 0


Discussions

NINA | Toothbrush cups

22 downloads · 8 months ago in  and 
Charles R
CharlesRegaud2.8K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 104+ more