Printing Instructions for the Lamp

Files included: Shade.stl Shade support.stl Stand x 3.stl (print 3 times) Top stand x 3.stl (print 3 times) Bottom connection.stl Top connection.stl

Print settings:

Shade (Shade.stl) Nozzle: 1.0 mm (or 0.8 mm, but less sturdy) Layer height: 0.3 mm Wall loops: 1 Supports: none Top shell layers: 0 Bottom shell layers: 3 Bottom surface pattern: concentric Infill: 0%

Other parts (Top stand x 3.stl, Stand x 3.stl, Shade support.stl, Bottom connection.stl, Top connection.stl) Nozzle: 0.4 mm Layer height: 0.2 mm Infill: 15% Supports: only if needed Walls and shells: standard slicer defaults

Assembly:

1. Print all parts as listed above.
2. Attach three Stand parts to the Bottom connection.
3. Add the Top stand parts to the upper ends of the legs.
4. Place the Shade support in the center to hold the shade.
5. Fit the Shade on top.
6. Lock with the Top connection.
7. Insert the E14 lamp holder through the hole in the connection after assembling all printed parts.