Michael M

Stained Glass Depictions of the Lone Crow - Set of Bookmarks

by
BooneCo3d
Follow
Follow
Remix Model
BooneCo3d
BooneCo3d
|
Image 3 of 5
Stained Glass Depictions of the Lone Crow - Set of Bookmarks 3d model
BooneCo3d
BooneCo3d
|
Image 3 of 5
Stained Glass Depictions of the Lone Crow - Set of Bookmarks 3d model
2D
3D
Makes
Stained Glass Depictions of the Lone Crow - Set of Bookmarks 3d model
Stained Glass Depictions of the Lone Crow - Set of Bookmarks 3d model
Stained Glass Depictions of the Lone Crow - Set of Bookmarks 3d model
Stained Glass Depictions of the Lone Crow - Set of Bookmarks 3d model
Stained Glass Depictions of the Lone Crow - Set of Bookmarks 3d model

Week 7 - Another combination of two ideas: Stained glass and the crow. No bird has more symbolism and mystery associated with it and the window design just brings out it in great detail.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 65.03x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #9 (0.8mm) swap to Beige At layer #18 (1.52mm) swap to White for the rest.


15 Likes12 DownloadsJuly 16, 2024