Week 7 - Another combination of two ideas: Stained glass and the crow. No bird has more symbolism and mystery associated with it and the window design just brings out it in great detail.
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 65.03x205mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Beige Transmission Distance: 8
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue
At layer #9 (0.8mm) swap to Beige
At layer #18 (1.52mm) swap to White for the rest.
