Fanart - Star Wars Legends a Sith Lord of the Past - Set of bookmarks
byBooneCo3dweek 24 bonus - Star wars fan art. A depiction of a sith lord with his dual sabers.
For these models: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 70.24x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA Default White Transmission Distance: 5 This print uses 5 unique filaments
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #12 (1.04mm) swap to Yellow At layer #16 (1.36mm) swap to Lilac Purple At layer #21 (1.76mm) swap to White for the rest.