Michael M

Fanart - Star Wars Legends a Sith Lord of the Past - Set of bookmarks

by
BooneCo3d
Follow
Follow
Remix Model
BooneCo3d
BooneCo3d
|
Image 1 of 5
Fanart - Star Wars Legends a Sith Lord of the Past - Set of bookmarks 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 5
Fanart - Star Wars Legends a Sith Lord of the Past - Set of bookmarks 3d model
2D
3D
Makes
Fanart - Star Wars Legends a Sith Lord of the Past - Set of bookmarks 3d model
Fanart - Star Wars Legends a Sith Lord of the Past - Set of bookmarks 3d model
Fanart - Star Wars Legends a Sith Lord of the Past - Set of bookmarks 3d model
Fanart - Star Wars Legends a Sith Lord of the Past - Set of bookmarks 3d model
Fanart - Star Wars Legends a Sith Lord of the Past - Set of bookmarks 3d model

week 24 bonus - Star wars fan art. A depiction of a sith lord with his dual sabers.

For these models: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 70.24x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA Default White Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #12 (1.04mm) swap to Yellow At layer #16 (1.36mm) swap to Lilac Purple At layer #21 (1.76mm) swap to White for the rest.


0 Likes5 DownloadsNovember 5, 2024


0 Likes5 DownloadsNovember 5, 2024