Wind Spinner Balloon

3dprintingworld

Remix Model

Social

Become a member

Makes

Wind Spinner Balloon - PolyLite Purple
200mm tall on a MK3S+
.2mm layers - 3d model

Wind Spinner Balloon - Too bad cannot post video, images aren't quite enough for this model. - 3d model

Wind Spinner Balloon - Quantum Blue Raspberry
200mm tall on a MK3S+
.2mm layers - 3d model

Wind Spinner Balloon - Had some interesting expansion/contraction along the fins creating a serrated edge, but the print turned out so good, I'm gifting it for a B-Day. Made @ 75% on the Prusa Mini+ with Eryone Matte Dual Color Blue/Pink. - 3d model

Wind Spinner Balloon - Printed in Nebula Multicolor. This model is what pushed me over the edge and inspired me to purchase a 3D printer. The print turned out great. Had to scale it to 95% because of the height. - 3d model

This model is restricted by licensing terms.

View license.

Wind Spinner Balloon

This model looks like a balloon but its actually a Wind Spinner. It prints all as one piece without supports. I used helper disc’s(brim), to make sure I had enough bed adhesion. I did not use z-hop but that might help keep the fins stable while printing if you have this issue. Your printer will also need to ability to make a 1” bridge. The model as downloaded is 232mm tall but I’ve printed it at 200mm and 300mm, I’m sure you could go taller or shorter than that.

I used these Ball Bearing Swivels(aff) to allow it to spin better.

Printed on the Muldex rep-rap IDEX printer with [Eryone Matte Dual Color PLA. FYI… its PLA so keep out of the sun/heat.

Support and Licensing If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my Patreon

Tags:

116 Likes492 DownloadsJune 21, 2022

This model is restricted by licensing terms.

View license.