This fidget toy is based on a common toggle switch mechanism. Assembly requires no hardware.
Printing
All parts can be printed without supports.
Print spring with 100% infill. Ideally, the filament path should run the length of the spring. This can be achieved by forcing the infill to be horizontal instead of diagonal or by setting the perimeter count to a high value.
Print the peg in the back case with a high infill to prevent snapping.
Customization
Springs
- Spring - Default option
- Half Click Spring - Provides a half-click state
Cases
- Case Front/Back - Default option
- Bolt Case - Supports a metal bolt
- Strong Case Front/Back - Uses the Strong Central Post
Buttons
- Default Button
- Emotive button - 2-part button with an expressive face
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
Click here for attribution examplestion examples