It is a Fidget Button made accidentally while solving a snap-to-place solution.

Fidget Button

Fidget Buttons.3mf

**Small size:** 
- check out other sizes and follow for more designs

**Main features:**
- Modular: can be built in small towers
- Self-watering: has its own water reservoir 
- Air-pruning root design: air holes for a better root system

**Print settings**
- 0.3mm layer height
- 5 walls for optimal waterproofing
- No supports needed

**Post process**
- The main planter needs to be watertight with resin coating or spray but it depends on the printed material. With some good quality filament, it doesnt have to be treated.


Tips:
For the same perforated look of the legs use only infill (triangles) with 50%
Matte filament looks better, avoid filament that has too much of different material fillings. It is weakening thin walls in time.

Trinity Plant Pot S

S_Pot design1.stl

**Medium size:** 
- check out other sizes and follow for more designs

**Main features:**
- Modular: can be built in small towers
- Self-watering: has its own water reservoir 
- Air-pruning root design: air holes for a better root system

**Print settings**
- 0.3mm layer height
- 5 walls for optimal waterproofing
- No supports needed

**Post process**
- The main planter needs to be watertight with resin coating or spray but it depends on the printed material. With some good quality filament, it doesnt have to be treated.


Tips:
For the same perforated look of the legs use only infill (triangles) with 50%
Matte filament looks better, avoid filament that has too much of different material fillings. It is weakening thin walls in time.

Trinity Plant Pot M 

M_Pot design1.stl

**Large size:** 
- check out other sizes and follow for more designs

**Main features:**
- Modular: can be built in small towers
- Self-watering: has its own water reservoir 
- Air-pruning root design: air holes for a better root system

**Print settings**
- 0.3mm layer height
- 5 walls for optimal waterproofing
- No supports needed

**Post process**
- The main planter needs to be watertight with resin coating or spray but it depends on the printed material. With some good quality filament, it doesnt have to be treated.


Tips:
For the same perforated look of the legs use only infill (triangles) with 50%
Matte filament looks better, avoid filament that has too much of different material fillings. It is weakening thin walls in time.

Trinity Plant Pot L

L_Pot design1.stl

**Double: Small size:** 
- check out other sizes and follow for more designs

Converge the aesthetic and functional aspects of your home or garden with the 3D-printed double-size small modular planter

**Main features:**
- Modular: can be built in small towers
- Self-watering: has its own water reservoir 
- Air-pruning root design: air holes for a better root system
**- Double size for bigger distribution of the plant**

**Print settings**
- 0.3mm layer height
- 5 walls for optimal waterproofing
- No supports needed

**Post process**
- The main planter needs to be watertight with resin coating or spray but it depends on the printed material. With some good quality filament, it doesnt have to be treated.


Tips:
For the same perforated look of the legs use only infill (triangles) with 50%
Matte filament looks better, avoid filament that has too much of different material fillings. It is weakening thin walls in time.

Trinity Plant Pot DS

DS_Pot design1.stl

**Double: Large Size:** 
- check out other sizes and follow for more designs

**Main features:**
- Modular: can be built in small towers
- Self-watering: has its own water reservoir 
- Air-pruning root design: air holes for a better root system

**Print settings**
- 0.3mm layer height
- 5 walls for optimal waterproofing
- No supports needed

**Post process**
- The main planter needs to be watertight with resin coating or spray but it depends on the printed material. With some good quality filament, it doesnt have to be treated.


Tips:
For the same perforated look of the legs use only infill (triangles) with 50%
Matte filament looks better, avoid filament that has too much of different material fillings. It is weakening thin walls in time.

Trinity Plant Pot DL

DL_Pot design1.stl

**Double: Medium Size:** 
- check out other sizes and follow for more designs

**Main features:**
- Modular: can be built in small towers
- Self-watering: has its own water reservoir 
- Air-pruning root design: air holes for a better root system

**Print settings**
- 0.3mm layer height
- 5 walls for optimal waterproofing
- No supports needed

**Post process**
- The main planter needs to be watertight with resin coating or spray but it depends on the printed material. With some good quality filament, it doesnt have to be treated.


Tips:
For the same perforated look of the legs use only infill (triangles) with 50%
Matte filament looks better, avoid filament that has too much of different material fillings. It is weakening thin walls in time.

Trinity Plant Pot DM

DM_Pot design1.stl

An original planter that is:
-  modular: endless combinations for assembly
- self-watering: 
- air-pruning design: better growth of the roots. 

Trinity planters can be built in the towers, in the double towers, or in groups of planters. It is designed to stand or to hang with features of self-watering and air pruning. It has multiple inner pots for the optional distribution of plants.

It is designed especially for FDM 3D printing with printable angles, and corners. The main planter needs to be watertight with resin coating but it depends on the printed material, thickness, and perimeters of the wall.

Printed in PETG
- For the same perforated look of the legs use only infill (triangles) with 50%
The main pot and inner pots are printed at 0,3 layer height for time savings. Probably you need to use epoxy coating from the inside. Test it before use.
- For the watertight surface of the main POT without epoxy use at least 6 perimeters for the walls and lower layer height to 0,15 (thickness is 2mm) Test it before use.
- Other parts are printed at 0,2 layer hight



Trinity planter Old Design

POT Prime.stl

Commercial License to sell physical 3D prints 
**Unlimited** downloads from the entire library of Orispoke designs
Save **30%** when you choose an Annual Plan


Commercial

Get **8 models**/month
Save **30%** when you choose an Annual Plan
Files are for **personal use** only 

Creator

Get **4 models**/month
Save **30%** when you choose an Annual Plan
Files are for **personal use** only 


Personal

Legs.3mf

Legs.stl

M_Inner plant pot.3mf

M_Inner plant pot.stl

M_Pot design1.3mf

S_Inner plant pot.3mf

S_Inner plant pot.stl

S_Pot design1.3mf

DS_Inner plant pot.3mf

DS_Inner plant pot.stl

DS_Pot design1.3mf

Hi, my name is Fero Toth. I'm a designer in the frontier of product and furniture design. I found joy in creating 3D printable designs for plants and lights and this is the result. 

If you like what you see here, support me by following and let me know by liking which one do you like the most.

Let's use new tech in projects with a positive impact.


Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

orispoke

Achievements

Seedling

Pinned models

Trinity Plant Pot M

Trinity Plant Pot S

Trinity Plant Pot DS

Fidget Button

Trinity Plant Pot S

Trinity Plant Pot M

Trinity Plant Pot L

Trinity Plant Pot DS

Trinity Plant Pot DL

Trinity Plant Pot DM

Trinity planter Old Design