This model is restricted by licensing terms.
View license.
This little tree makes a great little gift, stocking stuffer or present topper 🌲 Print more than one and make a mini forest 🌲🌲🌲
Dimensions of tree (assembled): 2 ½ in x 2 ¼ in x 1 in.
3D Printing Instructions: PLA Basic recommended* Layer Height 0.2mm Infill 10-15% Supports needed under tab at end of tree
*Basic PLA is the best for this print. I don’t recommend PLA Silk or PLA Matte filaments. This is detailed (on the inside) and the tolerances are small. I printed several of these in these three types of filaments and Basic PLA always printed the best and had smoother “movement” when done.
To assemble, slide the trunk over the peg at the bottom of the tree. (You can add some super glue if you'd like:)
Have fun printing! 😊
Categories:
22 Likes76 DownloadsNovember 13, 2024
22 Likes76 DownloadsNovember 13, 2024
This model is restricted by licensing terms.
View license.
Instructions
Filament • 0.2mm
MaterialPLA
Layer height0.2 mm
Infill density15 %
SupportsGrid - Manual
BrimNo