I have received requests for a smaller and faster printing Pixel Heart Fidget (compared to my original Pixel Heart Fidget that’s available with my Heart Box model). So here it is ❤️

Here is how the two different sizes compare: Original Pixel Heart Fidget: 25 mm tall, 30 grams, 1 hr. 50 min. New Small & Short Pixel Heart Fidget: 15 mm tall, 20 grams, 1 hr. 20 min.

Although the smaller size has less ‘droop’ than the original it still is a fun fidget that offers a slimmer profile for Valentine exchanges 💕

3D Printing Instructions: PLA basic filament preferred Layer Height 0.2mm Infill 10% No supports needed

I recommend Basic PLA for this print.

If you print with Silk PLA or Matte PLA I recommend you decrease the Outer Wall Speed to 50mm/s and the Inner Wall Speed to 100mm/s. This will improve the quality and ‘movement’ of the print.

If you have any issues with adhesion I recommend you use a little glue on the print bed and slow the overall print speed down to 75%

I have also included a 3mf project file with the following print profiles:

• Print Plate #1(Small & Short Pixel Heart): one color, settings for Basic PLA

• Print Plate #2 (Small & Short Pixel Heart): one color, settings for Silk PLA or Matte PLA with Outer Wall Speed 50m/s and Inner Wall Speed 100mm/s

Have fun printing and Happy Valentine’s Day! 💕 - Erin