Willy the Warthog.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Overture Cement Gray Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA Overture Light Gray Transmission Distance: 0.7 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Charcoal Black At layer #14 (1.2mm) swap to Cement Gray At layer #17 (1.44mm) swap to Grey At layer #22 (1.84mm) swap to Light Gray At layer #27 (2.24mm) swap to Latte Brown At layer #41 (3.36mm) swap to Jade White for the rest.
Frame not included.