Pembroke Corgi Hueforge Print

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 233x233mm in size. You may print at higher layer heights below the Min Depth of 0.96mm. The Max Depth is 5mm and the Actual Depth is 5mm

NOTE - MY RANGE OF PICTURE FRAMES ARE AVAILABLE SEPARATELY. SEE HERE

Filaments Used: PLA Overture Black Transmission Distance: 0.7 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA+ Esun Dark Blue Transmission Distance: 2 PLA+ Esun Brown Transmission Distance: 1.5 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 9 unique filaments

Swap Instructions: Start with Black At layer #18 (1.52mm) swap to Charcoal Black At layer #24 (2mm) swap to Dark Blue At layer #25 (2.08mm) swap to Brown At layer #30 (2.48mm) swap to Brown At layer #38 (3.12mm) swap to Orange At layer #45 (3.68mm) swap to Yellow At layer #48 (3.92mm) swap to Bone White At layer #52 (4.24mm) swap to Jade White for the rest.

Frame not included.