Fade to Sax Dimension Layer Art (frame not included)

FOR MY COMPLETE RANGE OF 3D PRINTABLE PICTURE FRAMES, SEE HERE

Printing Instructions:

For Bambu Studio users, the included 3MF file has everything ready to go — colours are preloaded, and it includes speed and height range modifiers to reduce your print time.

⚠️ Important: The height range modifier in the 3MF file changes the layer height below the base thickness. If you need to reload the colour swaps manually, ignore the layer # values shown below and instead use the millimetres (mm) values for accurate swaps.

Otherwise, if you’re using the STL file, follow the instructions below as written.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

This print measures 325mm x 320mm. You can scale the size up or down by adjusting the X and Y axes, but do NOT change the height (Z axis).

You may print at higher layer heights below the Base Thickness of 1.4mm The Max allowed Thickness is 2.84mm and the Actual Thickness is 2.84mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.1 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #38 (1.68mm) swap to Maroon Red At layer #41 (1.8mm) swap to Sunflower Yellow At layer #52 (2.24mm) swap to Yellow At layer #65 (2.76mm) swap to Jade White for the rest.