Diesel Punk Owl. Perhaps the most underestimated bird of prey, this owl is a diesel punk mash-up I created for my wife. This piece measures 233 x 233mm with a depth of 4.24mm.

Print at 100% infill using a layer height of 0.08mm with a first layer of 0.16mm.

NOTE - MY RANGE OF PICTURE FRAMES ARE AVAILABLE SEPARATELY. SEE HERE

Filaments Used: PLA Overture Black Transmission Distance: 0.7 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Overture Cement Gray Transmission Distance: 0.6 PLA Overture Light Gray Transmission Distance: 0.7 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Charcoal Black At layer #16 (1.36mm) swap to Cement Gray At layer #24 (2mm) swap to Light Gray At layer #31 (2.56mm) swap to Orange At layer #35 (2.88mm) swap to Yellow At layer #37 (3.04mm) swap to Bone White At layer #38 (3.12mm) swap to Jade White for the rest.

NOTE - Picture frame is not included in this download.