CrazyBull

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 233x233mm in size. The Max Depth is 2.5mm and the Actual Depth is 2.6mm

FRAME DESIGNS ARE AVAILABLE SEPARATELY. SEE HERE

Filaments Used: PLA BambuLab Basic Maroon Red (for .3mf file only. for the .stl file, start with black) PLA BambuLab Basic Black Transmission Distance: 1.4 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Cyan Transmission Distance: 1.9 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Purple Transmission Distance: 1.8 PLA+ Esun Bone White Transmission Distance: 5 This print uses 11 unique filaments

Swap Instructions: Start with Maroon Red or any colour that’s NOT black (for .3mf version) At layer #4 (0.4mm) swap to Black (start with black for .stl version) At layer #7 (0.64mm) swap to Charcoal Black At layer #10 (0.88mm) swap to Blue At layer #12 (1.04mm) swap to Cyan At layer #13 (1.12mm) swap to Jade White At layer #14 (1.2mm) swap to Red At layer #18 (1.52mm) swap to Orange At layer #19 (1.6mm) swap to Yellow At layer #24 (2mm) swap to Purple At layer #25 (2.08mm) swap to Bone White At layer #28 (2.32mm) swap to Jade White for the rest.