Chaucer the Chimp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 233x233mm in size. The Depth is 5mm. This print uses 13 unique filaments.

NOTE - MY RANGE OF PICTURE FRAMES ARE AVAILABLE SEPARATELY. SEE HERE

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Green Transmission Distance: 2 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA Overture Cement Gray Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA+ Sunlu Grey Transmission Distance: 2 PLA BambuLab Basic Cyan Transmission Distance: 1.9 PLA BambuLab Basic Orange Transmission Distance: 5 PLA Overture Matte Light Gray Transmission Distance: 0.3 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Green At layer #16 (1.36mm) swap to Black At layer #19 (1.6mm) swap to Charcoal Black At layer #22 (1.84mm) swap to Blue At layer #25 (2.08mm) swap to Cement Gray At layer #28 (2.32mm) swap to Blue At layer #29 (2.4mm) swap to Brown At layer #35 (2.88mm) swap to Grey At layer #36 (2.96mm) swap to Cyan At layer #38 (3.12mm) swap to Orange At layer #43 (3.52mm) swap to Light Gray At layer #44 (3.6mm) swap to Yellow At layer #46 (3.76mm) swap to Orange At layer #49 (4mm) swap to Bone White At layer #54 (4.4mm) swap to Jade White for the rest.

NOTE - Frame is not included in this download.