This is a 3D printed textile model, to be printed with a mesh fabric. A trimmed version ready for sewing application, and a linkable version (to be connected to make larger panels with UV curable resin, see attached PDF) are included, for 5 different build plate sizes. There are two tile sizes to choose from, a small and medium, both with a .5mm gap in between the pieces.

Use this textile in combination with a negative modifier, such as the clutch (shown in photos) - https://than.gs/m/1367536

If you're new to negative modifiers, here is a step by step guide - https://than.gs/m/1262146

I print these at .24mm layer height for a total of 3 layers, with the pause at the beginning of layer 2. There are 3mf files included with my settings already in place (There are only a handful of things that need to be changed). There are individual STL files that you can load into your slicer of choosing, simply adjust the parameters explained in the included printing on fabric guide PDF. If you have any questions, send me an email at Kaizen3DPrints@gmail.com

License Summary: Personal use only unless you hold a Commercial License. No resale or sharing of files. Selling printed models allowed only with an active Commercial License.