Ogee Inspired Textile - Two sizes
This is a 3D printed textile model, to be printed with a mesh fabric. A trimmed version ready for sewing application, and a linkable version (to be connected to make larger panels with UV curable resin, see attached PDF) are included, for 5 different build plate sizes. There are two tile sizes to choose from, a small and medium, both with a .5mm gap in between the pieces.
Use this textile in combination with a negative modifier, such as the clutch (shown in photos) - https://than.gs/m/1367536
If you're new to negative modifiers, here is a step by step guide - https://than.gs/m/1262146
I print these at .24mm layer height for a total of 3 layers, with the pause at the beginning of layer 2. There are 3mf files included with my settings already in place (There are only a handful of things that need to be changed). There are individual STL files that you can load into your slicer of choosing, simply adjust the parameters explained in the included printing on fabric guide PDF. If you have any questions, send me an email at Kaizen3DPrints@gmail.com
License Summary: Personal use only unless you hold a Commercial License. No resale or sharing of files. Selling printed models allowed only with an active Commercial License.
Ogee Inspired Textile - Two sizes
Hand sewn vertical wallet
256x256 PFLAT sheet holder
Massage Roller
Spinning gear fidget ring
Flat band fidget ring
Large TPU foldover bag
Adjustable Strap (48"/122cm max length)
Small Foldover Bag
Customizable Passport Wallet
Tall TPU Bifold Wallet for sewing
Vertical Wallet for Chicago Screws
Square Grid Negative Modifier
Hex Grid Fabric Modifier
Heart Pixel Pattern Textile and Modifiers
Vertical TPU wallet with rivets and grommets
Flippy heart textile and modifiers
Foldable TPU bag sized for Snapmaker U1
Crossed Basket Weave Textile / Modifier
Thin Beaded Textile / Modifier
