Wall Mount Key Hanger

4.4K downloads · 5 years ago · **Model** This is a holder for your keys (or anything else that you might misplace) featuring a doub

This model is restricted by licensing terms.

View license.

Description

Model This is a holder for your keys (or anything else that you might misplace) featuring a double action mechanism for locking and unlocking the key ring in place as well as ejecting it. It’s 100% 3D printed with only double-sided tape or two screws required to mount it to a wall. Featuring 3 different keyring styles and variants that hold from 1 to 4 key rings. Colour code your print or add your own name or logo to the keyring design. This design is based on my Seat Belt Buckle Desk Fidget Toy.

Check out the Build Video for assembly instructions.

Print Settings

Button Spring – 0.2 mm layer height, 3 mm brim
Button – 0.2 mm layer height, supports and 3 mm brim
Case - 0.2 mm layer height, supports
Case Bottom – 0.2 mm layer height
Case Top – 0.2 mm layer height
Latch – 0.12 mm layer height
Key rings – 0.2 mm layer height

Hardware Required 3M Command Strips or double-sided tape to mount to wall.

More Electrosync YouTube Instagram Website

Community Makes (10)

175% scale. Easy fun print. 10/10 would absolutely recommend.

Had a bit of trouble getting the ejection bit of filament just right, but really, the weight of the keys is planty

PLA parts came out great first time. Casing parts from black PETG were harder to print as it was my first experience with this material.

This is an entry for the Box `O Rocks that Zach Freedman is giving away. Please pick me!

Great model thx for this. p.s I was sent by Zack Freedman

Needed to do some sanding on the button as it did not fit on the square and made it too easy to pull out the clip.

D'oH! Press button is upside down. Still love it.
Thanks for the upload.

Community Makes (10)

Discussions

coolmanok12343 years ago

I was sent by Zack Freedman.

blue107467l6 months ago

same

Krunk3D11 months ago

175% scale. Easy fun print. 10/10 would absolutely recommend.

joe123451 year ago

I love this design. I was trying to come up with something like it for myself but hadn't gotten around to it. This solves a huge problem for me. Thank you!

Zeki3D1 year ago

I really liked your design. I have a question: in the comments, I read that there are several tongues with logos of different car brands, but when I downloaded the project, I couldn’t find the tongues with the designs. Do you have them separately, or could you share them with me?

mr.geennius2 years ago

made 2 "case top" the ones that have the hole on it, and the filament doesnt fit in any of them. looks like a 1mm hole for a 1,75mm filament, nice. USE 0,25 XY HOLE COMPENSATION

coolmanok12343 years ago

I need help. I can't print it. What scale do I do?

Holler423 years ago

Can I sell these in a physical form? Or would I need to donate money?

Jane Barone3 years ago

sliced with cura, printed with aquila, nothing fits together properly, everythings too tight to slide together properly. Needs higher tolerances in the design.

View all 17 discussions