Gear Fidget Spinner Print in Place 3d model

Gear Fidget Spinner Print in Place

3.9K downloads · 1 year ago · Hey, this is a Print in Place Planetary Gear Fidget Spinner. These type of spinners have been around

This model is restricted by licensing terms.

View license.

Description

Hey, this is a Print in Place Planetary Gear Fidget Spinner. These type of spinners have been around for ages. It's an intermediate step to another design.

Print Settings: I used .16 layer height and put the seam in random. No Supports.

Tags:

Community Makes (3)

Snapmaker U1 (Was not an option on the Printer drop down)
Works best with PLA Matt on the outside/Inside and PLA Silk for the small Cogs

Community Makes (3)

Discussions

Firebirdtpg10 months ago

PrinterBambu Lab X1

gfcaim1 year ago

PrinterCreality Ender 5 Pro

MaterialPLA

Layer height0.12 mm

Infill density10 %

SupportsNone

joe4536645346623 months ago

Snapmaker U1 (Was not an option on the Printer drop down) Works best with PLA Matt on the outside/Inside and PLA Silk for the small Cogs

MaterialPLA+

Layer height0.16 mm

Infill density10 %

SupportsNone

BrimNo

JaRu0916 days ago

did not work

niloc321gaming11 months ago

Dose anyone have any tips for helping the print print better when ever i print it, it sticks together and dose not spin.

joe4536645346623 months ago

Use PLA Matt for the Outside/Inside and PLA Silk for the small cogs with a Layer height of 0.16mm. This worked perfect for me. I had problems when I used PLA matt for the small cogs and also with a 0.2mm Layer height.

boogan17894 months ago

calibrate your printer with the filament your using. i like to do temp, volemtric speed, and then pressure advance, then if you want to get picky do a flow rate. volemetric speed changes whe you change nozzle size