Gear Fidget Spinner Print in Place
3.9K downloads · 1 year ago · Hey,
this is a Print in Place Planetary Gear Fidget Spinner. These type of spinners have been around
This model is restricted by licensing terms.Â
View license.
Hey, this is a Print in Place Planetary Gear Fidget Spinner. These type of spinners have been around for ages. It's an intermediate step to another design.
Print Settings: I used .16 layer height and put the seam in random. No Supports.
Gear Fidget Spinner Print in Place
3.9K downloads · 1 year ago in  andÂ
This model is restricted by licensing terms.Â
View license.
Whiplash Fidget Toy by Ruven Bals and Oskar van Deventer
Slime Ball Fidget Toy by Ruven Bals Print in Place
Orbifact Fidget Toy by Ruven Bals
Planetary Gear Cube Fidget Toy by Ruven Bals
Gear Ball Fidget Toy
Slime Ball 2.0 Fidget Toy Print in Place by Ruven Bals
Slime Egg Fidget Toy Print in Place by Ruven Bals
Tornado Tower Fidget Toy
Kinetic Vase
Auxetic Chess Print in Place by Ruven Bals
Jacobs Ladder Fidget Toy
Gear Fractal Fidget Toy
Twisty Chess Board by Ruven Bals
Sliced Pumpkin Box
Hinge Ball transforming Fidget Toy
Gear Tentacle Fidget Toy
Brain Gear Fidget Toy
Crystal Bloom Lamp for the Ceiling
Liquid Cat Fidget Toy Print in Place
did not work
Dose anyone have any tips for helping the print print better when ever i print it, it sticks together and dose not spin.
Use PLA Matt for the Outside/Inside and PLA Silk for the small cogs with a Layer height of 0.16mm. This worked perfect for me. I had problems when I used PLA matt for the small cogs and also with a 0.2mm Layer height.
calibrate your printer with the filament your using. i like to do temp, volemtric speed, and then pressure advance, then if you want to get picky do a flow rate. volemetric speed changes whe you change nozzle size
same
The only way I could get this to spin was to print at +20%
At 100% as-is, in cura with horizontal expansion of -0.05 it spins but the gears slip.