Popples38 followers

Kobra 3 Max-Cable Chain

108 downloads · 1 year ago · To print this for your Kobra 3 Max, you'll need: **40 links with clips**, and **one of everything

This model is restricted by licensing terms.

View license.

Description

To print this for your Kobra 3 Max, you'll need:
40 links with clips, and one of everything else.

I also recommend picking up a 90-degree power cord — it keeps the cable out of the way and makes for a cleaner setup.

Link to original Models for Kobra 3 https://www.makeronline.com/en/model/Kobra%203%20Side%20Cable%20Chain%20with%20removable%20camera%20mount/164219.html

Tags:

Discussions

manfredaretz6 months ago

Which camera mount do you use? I can't use the stock mount.

Popples6 months ago

Kobra 3 Max-Chain End-Camera.STEP is made specifically for the K3 Max, thats the chain end that gets mounted to the z/x-axis. Kobra 3 Max-Chain-Camera Mount.stl will accept the standard camera kit housing and links up to the chain end mount.

Shmike7 months ago

Can you add a photo of what the base clicks into or how it mounts?

Popples7 months ago

there is a plastic cover that is snaped in to the extruded rail where the wires are, pull it off and replace with the long l-shaped one in the models. no screws, just tabs...

jwulf929 months ago

can you mod the ends for the 3 v2? XD printed the chain for the wrong printer

Popples7 months ago

sorry i don't have the V2 so i wouldn't even know what's different.

robowolv11 months ago

Would you recommend PETG for this, or would PLA work?

Popples11 months ago

I don't have a lot of experience with PLA, back in the day I printed exclusively with ABS and for last few years now I've come to really love PETG. PLA will most likely work just fine, the prints should never see much stress.