Kobra 3 Max-Cable Chain
106 downloads · 1 year ago · To print this for your Kobra 3 Max, you'll need:
**40 links with clips**, and **one of everything
This model is restricted by licensing terms.
View license.
To print this for your Kobra 3 Max, you'll need:
40 links with clips, and one of everything else.
I also recommend picking up a 90-degree power cord — it keeps the cable out of the way and makes for a cleaner setup.
Link to original Models for Kobra 3 https://www.makeronline.com/en/model/Kobra%203%20Side%20Cable%20Chain%20with%20removable%20camera%20mount/164219.html
Kobra 3 Max-Cable Chain
106 downloads · 1 year ago in and
This model is restricted by licensing terms.
View license.
Anycubic Kobra 3 Side Cable Chain for Stock Camera Mount
Ender 3 Max Cable Chain Solution
Anycubic Kobra 3 Rear Cable Chain (For Heated Bed)
Purge Diverter - Kobra 3 Max
![[Ender 3 Pro] [Remix] Ender_3_Extruder_Cable_Chain_Base 3d model](/_next/image?url=https%3A%2F%2Fstorage.googleapis.com%2Fproduction-thangs-public%2Fuploads%2Fattachments%2F61f58b47-db9e-4fda-9aca-e3f3aec270ee%2FEnder_3_Extruder_Plate_Cable_Chain_Base_robo_modded_fixed_for_ender_3_pro.png&w=3840&q=75)
[Ender 3 Pro] [Remix] Ender_3_Extruder_Cable_Chain_Base
Anycubic Kobra 3 Max poop deflector
Ender 3 Cable Chain Gantry Mount
Anycubic Kobra 3 Max Printer Stand
Anycubic Kobra Max SKR 3 EZ Adapter
Modified parts for the CR6 Max Cable Chain
Awesome Ender 3 Cable Chain mount for MegaX
ANYCUBIC KOBRA 3 MAX ACE-PRO OVERHEAD MOUNT
ANYCUBIC KOBRA 3 MAX DUAL ACE-PRO OVERHEAD MOUNT
Anycubic Kobra 3 cable support clip
Holder Clip for Creality K1 / K1 Max cable chain mount replacement
Kobra 3 Max Purge Catcher
Neptune 3 / Neptune 4 Max & Plus - Gantry Cable Mount - NO MORE DRAGGING!!
Tronxy X5SA direct drive with 10x15 cable chain
![[Ender 3 Pro] [Remix] Direct_Drive_Cable_Chain_Base 3d model](/_next/image?url=https%3A%2F%2Fstorage.googleapis.com%2Fproduction-thangs-public%2Fuploads%2Fattachments%2F7bbf8691-c914-4a92-914b-1739ff2e7503%2F%255BEnder_3_Pro_%255BRemix_Direct_Drive_Cable_Chain_Base_v3.png&w=3840&q=75)
[Ender 3 Pro] [Remix] Direct_Drive_Cable_Chain_Base
Which camera mount do you use? I can't use the stock mount.
Kobra 3 Max-Chain End-Camera.STEP is made specifically for the K3 Max, thats the chain end that gets mounted to the z/x-axis. Kobra 3 Max-Chain-Camera Mount.stl will accept the standard camera kit housing and links up to the chain end mount.
Can you add a photo of what the base clicks into or how it mounts?
there is a plastic cover that is snaped in to the extruded rail where the wires are, pull it off and replace with the long l-shaped one in the models. no screws, just tabs...
can you mod the ends for the 3 v2? XD printed the chain for the wrong printer
sorry i don't have the V2 so i wouldn't even know what's different.
Would you recommend PETG for this, or would PLA work?
I don't have a lot of experience with PLA, back in the day I printed exclusively with ABS and for last few years now I've come to really love PETG. PLA will most likely work just fine, the prints should never see much stress.