This is the Arboris Addon for the Moduluma Lamp Ecosystem!

The Moduluma Ecosystem is a modular lamp system where vases, shades, inlays, and decorative elements can be freely combined to create countless unique designs. Every part is interchangeable, tool-free, and designed for easy assembly, giving you endless freedom to create lamps that fit your style and space.

The Arboris is a modified version of the already existing lamp, retrofitted into the Moduluma Lamp Ecosystem. While the leafs are not interchangeable with the new leafs, its a great addition to the system, giving one new shade design for combination with the Moduluma Vases.

How to Print: Print the number of leaf parts indicated in the print plate description, depending on which lampshade you are using.

How to Build Your Moduluma Lamp: Print all the parts you need for your build:

One Vase + 4 x Clips Inlays for the Modular Vases (if using a modular vase) Prisma Petal Lamp Shade: 1x Moduluma Base 1x Top Ring 7x Spline Odd 7x Spline Even 63x Arboris Leafs Assembly Steps:

Prepare the Vase: Press-fit the inlays into the Modular Vase if you’re using one. As parts are mirrored, insert them all the same way—either with the print-plate side facing out or all facing in.

Insert Clips: Press-fit the clips into the top side of the vase.

Add Fixture: Insert your lamp fixture (E14, E27, or Bambu Lab LED kit).

Build the Shade: Insert the Splines into the Base: Take all Spline Even and Spline Odd parts and press-fit them securely into the Base Bottom. Alternate between Even and Odd splines as you go around. Make sure each spline is fully seated and aligned vertically — this forms the main frame of your lamp.

Attach the Top Ring: Once all splines are in place, carefully press-fit the Base Top onto the upper ends of the splines. Work around the circle evenly so that all splines connect smoothly and the structure stays balanced.

Attach the Leafs: Each leaf has a built-in press-fit connector to hold securely without glue or screws. Ensure all leafs are firmly pressed in and evenly aligned for a clean, consistent finish. Connect Shade and Vase: Position the finished shade above the vase and press-fit it onto the clips. Take care not to slip; if the fit is tight, press gradually around the lamp in sections until secure.

Cable Management: Route the cable into the slot at the bottom of the vase. Your lamp is now finished and decorated with the lush, clustered design of the Triple Leafs.

If you have any questions or run into issues, feel free to reach out anytime!