I modeled this gift box to make a Springo, but I figured it would also make a great little container to hold small presents.

This download contains the single material version of the model and the split model for dual color/material printing. If you only want the single color version, you can download it for free here.

The inside of this container is just over 50mm x 50mm x 60mm tall (roughly 2 inches in every direction). Of course you can scale the model up or down to suit different sizes, but the fit of the lid will change a bit.

No supports required as long as you've got decent bridging. I would recommend a .15mm or even .1mm layer height for the bow.

I know the print shown is a bit messy. I promise it's the printer and not the model. This is a relatively easy print :)

Model in photo was printed with Fillamentum Mint PLA(US Link) and RepRapper Red PLA