Place any object atop this column to turn it into an instant masterpiece!

This column is split into 3 parts for extra clean and easy printing, plus customizability (more options in my Wobbly Column set). The base, column and top print without supports and screw together. The bottom has an internal container where you can add weight for extra stability or to hide something small.

Printing Guidelines

Your general default print settings should work fine, with adjustments depending on the strength you need for your application. Settings I used:

0.16mm layer height, 3 shells, 5 top layers, 6 bottom layers, 15% Lightning infill.

The alignment of the top and bottom can vary from printing. If necessary you can fix things in place using glue or spacers between the middle and top parts.

The large column is ~282 mm tall, with the middle part being 208 mm tall. (Photographed large version was scaled to 125%). The small column is ~141 mm tall.

Photographed model was printed on the Qidi Plus4 3D Printer (Also on Amazon) using Panchroma Marble White PLA (Amazon) and 3DJAKE ecoPLA Tough Natural*

These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!.