Planter with Legs - The Lloyd
1.7K downloads · 3 years ago · Prints with no supports. I recommend using brims for the legs.
3 sizes included — 2.5", 4.5", and 6
This model is restricted by licensing terms.
View license.
Prints with no supports. I recommend using brims for the legs.
3 sizes included — 2.5", 4.5", and 6.5"
The legs need to be glued in to the base. I typically use Weld-On and a syringe to attached the legs but super glue works too!
kevin.s.campbell72 years ago
Very happy with how it turned out. Printed on AnkerMake M5C with ERYONE Matte Navy Blue PLA filament. Scaled the 6.5" up to 110% to fit the plant I had in mind. Great design!
william.heimbigner2 years ago
Printed using 2 different 30% wood-filled PLA filaments (had a little bit of nozzle clogging but it went okay), and then coated with XTC3D epoxy/resin to waterproof and shield the wood.
PrinterCreality K1 Max
MaterialPLA
Layer height0.2 mm
Planter with Legs - The Lloyd
1.7K downloads · 3 years ago in and
This model is restricted by licensing terms.
View license.
Flexi Legs Egg Planter / no supports / 3mf included
Grove Planter - Plant Pot with Tree Trunk Legs
FREYA | Standing Planter Pot
Relaxed planter for easy watering, planter cover with foot in water
.gif&w=3840&q=75)
Turtle Planter – 3D Printable Animal Plant Pot and Home Decor
Two-Leg Ripple Vase – Matte Sculptural Japandi Vase
Rooted Geometry – Modern Planter with Organic Twist | Roots Collection
Melted Planter Pot – "Melted" Pot for 3D Printing
Sugar Cane Candy Planter v1.2
Happy Hanging Pot
Plant Pot - Ripple DL
Plant Pot - Ripple L
Plant Pot - Ripple DM
Plant Pot - Ripple DS
Plant Pot - Ripple M
Plant Pot - Ripple S
Hungry Birds Planter / No Supports / Color Print
Rocket Bloom Vase – Space-Inspired Decorative Vase with Retro Rocket Design
Fancy Table - Mid Century Inspired
