Large flexi starfish v3 spans approx 237mm, so fits on a 256x256x256 build plate.

Updated shape, larger cuter eyes, the larger eyes now fuse 4 pieces together but ive found i takes little to nothing away from flexibility. Colour as many of the elements as you like, As always each element is individually colourable using the paint fill and edge detection. The more white dot your colour the longer the print time or just colour the eyes. Ive coloured the base using Height range, and there is a reason for this. So i do not recommend silks for this print as its significantly weaker than normal PLA. One way round this is to colour the base at height range and print the small joints in a basic PLA then changing to a silk. Ive printed in a matte, and matte is next on the list of weaker filaments but it is better than silk. Of course you don't have to print the base a different colour you can do it all one colour. But you have been warned about silk for this type of model. Secondly the joints are built to specific tolerances so do not scale down as you will run into breakages, instead go for the small version in a separate listing.

0.2 layer, at least 15% infill. No supports Ensure you have good adhesion as the first layer consists of very small parts

Filament used, Bambu basic white, black and Ziro northern lights for the main colour.