Cupid’s Lantern (Large Version) Inspired by the classic Festive Lamppost, the Large Edition of Cupid’s Lantern is a grand romantic centrepiece designed to make a statement. Important Note: This lantern is a unique model. While it shares a similar aesthetic to the Festive Lamppost, the dimensions are different—panes from the festive lamppost will not fit this version. This model has been specifically engineered with custom tolerances for its scale; please avoid scaling it down, as the parts are optimised for these exact dimensions. Key Features

• Dimensions: Approximately 25 x 25 x 40 cm.
• No Glue, No Supports: Designed for a clean, snap-and-screw assembly.
• Interchangeable Panes: Includes 6 different Valentine’s-themed designs.
• Customisable: Features 5 attachment points in the base for custom decorations. Printing Recommendations To ensure structural integrity and a smooth assembly at this larger scale, I recommend the following infill settings:
• Lantern Base: 10–15%
• Lantern Top: 5–10%
• Small Components: Minimum 15% Lighting Your Lantern This model is designed to house an LED Puck Light (up to 8cm in diameter).
• Pro Tip: Search for "Under Cabinet Lighting." I highly recommend choosing a puck with a remote control so you can turn the lantern on and off without opening the housing. Most come with an adhesive back for easy installation.
• Pro Tip: you can have the panels plain white. The build is straightforward and mechanical. Follow these steps for a perfect finish:

1. Panes: Slide your four chosen Valentine’s panes into the side slots.
2. Corner Rods: Screw the Base-to-Top threads into each corner. Note: The end with the longer thread must screw into the base.
3. Light: Secure your LED puck light into the base.
4. The Top: Slide the lantern top over the four corner rods. Ensure the panes sit snugly within the recessed slots of the top piece.
5. Caps: Secure the top by screwing the four small thread caps onto the corner rods.
6. The Loop: Insert the bar through the hole in the lantern top, then pass the threaded loop through. Secure it using the two dedicated caps.
7. Decorate: Snap the four heart decorations into the sides of the lantern top.
8. Hang: Pass the hook through the top loop, and you’re ready to display! Personalise Your Build I have incorporated 5 specific areas in the base for custom attachments. I used red ribbon, a tassel, and the 3D-printed hearts included in the file, but you can also add charms, red string, or other decorative elements to make it truly yours. Congratulations! You’ve successfully built the Large Cupid’s Lantern. Filaments used, Bambu Basic where, maroon red, light grey

• Blank panel coming in due course