The winged Version of the chick dragon. also available is the standard and mini version. and the accompanying feathered egg the wings are moveable Can not be scaled The wings are pre supported and print in place, due to the supports this version can not be scaled. if you scaled down the supports won't print correctly meaning the wings will move and you end up with spaghetti. on the opposite end if you scale up the supports will be to thick and you won't be able to move the wings. The 3MF is a 4 colour print As always each part is a separate body and can be coloured to your colouring by using the paint fill tool. have as little or as many colours as you like. Filaments used, Bambu matte yellow. Basic black white and maroon red. 0.2 layer, 15% infill