RAMA | Towel Hanger for kitchen rail

This is the hand towel hanger, part of the RAMA collection of kitchen rail accessories.

The rail comes in 3 different lengths (186mm, 210mm and 250mm). And the hanger comes in short and long versions.

The collection includes:

• a FREE set of wall brackets for Ø18mm or 3/4inch wooden rails, plus hanging planters and hooks.

And the following accessories:

• a magnetic knife rack
• a cookbook or ipad shelf
• a dishsoap and spong holder
• a drip tray to dry your cutlery
• a spice rack
• a towel holder

3D PRINT SETTINGS: All STL files are all already oriented properly. No need for supports.

You will need an adhesion brim (8 to 10mm) to print the rails vertically.

No brim needed for the end caps and the hangers.

Layer height: 0.2mm/layer Wall line count: 2 Infill: 15 to 20% (honeycomb on the pictures) Build adhesion type: 10mm brim Supports: None