GRANO | Desktop bin

Meet GRANO, a simple and stylish desktop bin, with a print-in-place swing lid.

DIMENSIONS | Ø123mm x H179mm

3D PRINT SETTINGS: All STL files are already oriented properly. No supports or adhesion brim needed.

BIN: The 3d model is full and needs to be turned into a shell by cancelling the top faces and the infill. Resolution: about 0.2mm / layer (I printed with 0.3mm/layer) Perimeter walls / wall lines: 3 lines for a 0.4mm nozzle, 2 lines for a 0.6 or 0.8mm nozzle. Top face layers: 0 Infill: 0% Bottom face layers: 3 or 4 Build adhesion type: None Supports: None

LID: The lid prints upside-down (STL already oriented properly) and needs regular settings with some infill. Resolution: about 0.2mm / layer (I printed with 0.3mm/layer) Perimeter walls / wall lines: 2 Infill: 20 to 30% Build adhesion type: None Supports: None