PINCH | Watering Can

Designed for fast printing, PINCH is a compact and stylish watering can designed for urban gardeners, plant enthusiasts, and anyone with a green thumb.

I designed it with the following in mind:

• A safe and unique grip you can grasp with your entire hand, no traditional thin handle.
• The top and pouring spout are open so you don't have to wonder "when" the water is going to pour out
• Each layer is just one continuous curve for fast printing. No holes and gaps and bridges that would create stringing and slow down the print.

The capacity is about 0.5L More versions coming soon for larger volumes!

DIMENSIONS | W 57mm x L 220mm x H 245 mm

Printing | ~3h

3D PRINTING SETTINGS

For a watertight result, make sure your printer is well calibrated and lubricated. Then, increase the wall line count to 3. That should do it!

Resolution: 0.2mm / layer or less Infill: None Build adhesion type: None Supports: None