GRAVITAS | Fast-print Fruit Bowl

Meet GRAVITAS, a super fast-print bowl for your fruits or all sorts of things.

It can be printed with a regular 0.4mm nozzle (2 wall lines) or a 1mm nozzle (1 wall line) without particularly tricky settings.

Happy printing!

DIMENSIONS | W 208 mm x L 203 mm x H 60 mm

PRINTING | ~2.5h

3D PRINT SETTINGS The bowl prints on its side, without any need for adhesion brim or supports. I modeled some "mouse ears" to hold in place the face that goes onto the printing bed. So no need for a brim or raft or other adhesion tricks. The STL file is already oriented properly.

For BambuLab users, turn on "Arachne" mode in the "Wall Generator" settings. Otherwise Bambu Studio will detect some of the weave layers as empty.

Layer height: 0.3mm/layer Wall line count: 1 Build adhesion type: None Supports: None Infill: None