FALDA | Pendant Light E26/27

Inspired by the flowing folds of a flamenco skirt, this pendant light is designed for vase-mode printing.

It comes in 2 sizes:

DIMENSIONS (Medium) | Ø209 x H180mm DIMENSIONS (Large) | Ø250 x H240mm

You can get the power cords from Amazon here:


For Europe: E27 cord:  https://amzn.to/3OVrZjK


For the US: E26/E27 cord: https://amzn.to/434c0qZ

3D PRINT SETTINGS: The shade prints upside-down. The STL file is already oriented properly.

It is meant to be printed in vase mode (spiralize or spiral vase).

For 0.8mm nozzle: • use 0.3 or 0.4mm/layer • line width of 0.8 to 1mm • 6 bottom layers

For 0.4mm nozzle: • use 0.2mm/layer • line width of 0.6 to 1mm • 12 bottom layers

Happy printing!