This is for you if you want a cute addition to your lens, or if you want a distraction to the kids when you are taking their portraits. Print the Bows in different colors if you want a more fun look!

Lens sizes: I have provided a couple of sizes in different plates in the attached Bambu Studio file, if you want another size you can scale the STLs provided. The original STLs are for a 67mm lens So if you want a 55 mm for example: (55/67)x100 = 82.09% The provided sizes are: 67, 58, 72, 52, 49, 46 mm . The last 4 sizes were requested by some of you in my previous models. If you don't like the fit of your printed part, scale up or down and print again.

Print settings: I have sliced for TPU using SpicyElephant's “Perfect TPU Print Settings” . I used Bambu TPU 95A HF. The Eyes and Bows used standard Bambu Basic settings, I added a Brim to the Bows so they become stable. I used Adaptive layer height to have smaller layer height in the important areas. No support is needed.

What should I make next?

-For Personal Use Only