Penny Farthing String Art
588 downloads · 4 years ago · Penny Farthing String Art
Print at 0.3mm layer height, if you are using Prusaslicer turn off 'wipe
This model is restricted by licensing terms.
View license.
Penny Farthing String Art
Print at 0.3mm layer height, if you are using Prusaslicer turn off 'wipe while retracting' in your printer settings.
Penny Farthing String Art
588 downloads · 4 years ago in
This model is restricted by licensing terms.
View license.
.jpg&w=3840&q=75)
F1 T-Shirt Transfer
F1 Tracks Car - sculpted
NanoSphere Lamp and Shade (E27 fitting)
Cardinal Bird String Art
Open Hearts Bowl
Suspended Butterfly Art (single colour files)
Glowing Heart Strings: Multi Color Files
Leafy Infill Bowl
Alone Art multicolour files
Beach Croc Toppers
Suspended Ball Artwork
Art Deco Wall Clock
Large Balloons Wall Vase: multicolour option
Design Walk-Through - Peace String Art
Benchy Diorama Tensegrity
Swing Carousel
String Bird Art
Twisted Star Bowl
USA States Vase Mode Model
witam mam pytanie mam drukarkę p1s i nie drukuje i szprych tylko same koła miał może ktoś taki problem ??
it print it without strings do you have a solution for this problem or a settings .. i used the bambu lab x1 carbon thanks<3
Did you set the layer height to 0.3mm? Also, change your wall generator to Arachne. You should be able to see the strings in the print preview. Hope this helps
Thank you. Do you print this laying flat or standing up (as it would be ridden)?