Ornate Puzzle Box
1K downloads · 3 years ago · This is an ornate octagonal puzzle box.
It has a slider that fits into the base which you push out
This model is restricted by licensing terms.
View license.
This is an ornate octagonal puzzle box.
It has a slider that fits into the base which you push out to release the lid.
Print the base with supports touching buildplate, just for the groove underneath.
Ornate Puzzle Box
1K downloads · 3 years ago in and
This model is restricted by licensing terms.
View license.
.jpg&w=3840&q=75)
F1 T-Shirt Transfer
F1 Tracks Car - sculpted
NanoSphere Lamp and Shade (E27 fitting)
Cardinal Bird String Art
Open Hearts Bowl
Suspended Butterfly Art (single colour files)
Glowing Heart Strings: Multi Color Files
Leafy Infill Bowl
Alone Art multicolour files
Beach Croc Toppers
Suspended Ball Artwork
Art Deco Wall Clock
Large Balloons Wall Vase: multicolour option
Design Walk-Through - Peace String Art
Benchy Diorama Tensegrity
Swing Carousel
String Bird Art
Twisted Star Bowl
USA States Vase Mode Model
wow looks amazing, can i ask what colour filament was used please?
I have successfully printed your Ornate Puzzle Box. Thank you for the beautiful design. I can’t get it put together. If I put the slider in, I can’t get the top to go down all the way. If I put the top on, I can’t get the slider in. Help please. Thank you Omniderb
After some experimentation I could print the lid perfectly in PLA by using a 65 degree bed, 220 degree nozzle, 0.2 (or more) layer height (not less), and a 50% print speed for the first 6 layers, no support. Bambu X1C, PLA Cold Plate (at 65 degrees), and Bambu Labs Onyx Sparkle PLA. "All Top Surfaces" ironing adds a nice finish.
can's get the top to print. I tried face up with a brim and organic supports but, after many hours and about 50%+ completed, it failed. It could not stay attached to the PEI plate.
Can’t get the top to print well oriented face down on my PEI plate. When I put it on a raft face down, it also looks bad. I’m pretty sure it would come out nice if I could print it with the top facing up. But the side pieces make it so I’d need a lot of support. Any suggestions?