Hero Me Gen7 Release 4 ZIP

**This STL is an example of a completed Hero Me Gen7 printhead mounted to the X carriage of a 3D printer.**

Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: **[MediaMan3D@gmail.com](mailto:MediaMan3D@gmail.com)**

The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. 

But If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs. 

by becoming a member you will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Hero Me Gen7 Example Model 1.stl

FREE Proxy marine - Very Modular

Helmet.stl

Collapsible Narsil Saber

1 - Dark Gray.stl

Medium 3D Printed Sound Panels! Bambu & Prusa Mk4 version!

205mm_Hex_Sound_Panel_V1_MULTIBODY.stl

40 mm, Mid Thread, T-Rod

40 mm - Mid Thread - T-Rod.stl

Helldivers 2 helmet SA-25 Steel trooper Fan Art

Helldivers helmet SA-25 Steel trooper done.stl

Moon Lithopanes

Moon 250mm.stl

Type 1, Small Thread Holes, 1x1 Outside Bracket

Type 1, Small Thread Holes, 1x1 Outside Bracket.stl

Softball Goose Gear for Porch Goose

PorchGooseCleatsSTL_FunFam3D.stl

6x6 MU - Center Grid Interfitted - MultiBoard Octagon Plate - 4x Multi-Material Stack

6x6 Multiboard Core Tile - x4 Multi-Material Stack.stl

Bashful Charmander

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

***Sculpt by Garrett***

If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

Annoying PIggy Bank

container (coin slot).stl

Karlach bust - Baldurs Gate 3 (Pre-Supported)

bust.stl

水水獺(精靈寶可夢)
Oshawott(Pokémon)



Oshawott(Pokémon)

菊草葉(精靈寶可夢)
Chikorita(Pokemon)

If you like my work, share and give me a like.

-------------------------------------------------------------------------------------------------------

Follow me here:
https://www.facebook.com/PatrickFanart.HK

-------------------------------------------------------------------------------------------------------

Support me:
https://www.patreon.com/PatrickFanart

-------------------------------------------------------------------------------------------------------
License:
Attribution．Noncommercial．No Derivative Works

Oshawott.stl

Gollnir the Battle Wizard - FREE

Gollnir-Wizard-The-Printing-Goes-Ever-On.stl

Desk Organizer 7X7 Ramen

cubby_outer_walls_5.obj

Navette Earrings - Struts

Navette Earring - Strut 3.stl

FREE Z-MINIS PACMAN

Ghost 2.stl

Print-N-Place Klackers

These are klackers or noisemakers that print in place as one part! They make a great toy for kids but I also find them as a great fidget toy for adults too.  

This a new version which is much easier to print. To have a successful print, most importantly you must have good adhesion to the bed. For the loudest klackers, more walls and infill the better but watch out for curling. If you have issue with curling, enable z-hop, or increase the amount of plastic after the tangency of the balls.

Getting them to Klack
If you are having a hard time getting them to klack I found the easiest way to get them started is to set them flat on a table so the klackers are spread out and as you pick them up off the table whip them back down to make them klack. There are two techniques; the single klack and the double klack as demonstrated here: 


Redxii -Final Fantasy 7

ff7-redxiii.stl

y

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Hero Me Gen7 Release 4 ZIP

FREE Proxy marine - Very Modular

Collapsible Narsil Saber

Medium 3D Printed Sound Panels! Bambu & Prusa Mk4 version!

40 mm, Mid Thread, T-Rod

Helldivers 2 helmet SA-25 Steel trooper Fan Art

Moon Lithopanes

Type 1, Small Thread Holes, 1x1 Outside Bracket

Softball Goose Gear for Porch Goose

6x6 MU - Center Grid Interfitted - MultiBoard Octagon Plate - 4x Multi-Material Stack

Bashful Charmander

Annoying PIggy Bank

Karlach bust - Baldurs Gate 3 (Pre-Supported)

Oshawott(Pokémon)

Gollnir the Battle Wizard - FREE

Desk Organizer 7X7 Ramen

Navette Earrings - Struts

FREE Z-MINIS PACMAN

Print-N-Place Klackers

Redxii -Final Fantasy 7