Universal High Airflow Aux Fan

AuxFan_Fan Shroud.stl

#065 Alakazam Pokemon Wiremon Figure

Bring the magic of the Alakazam Pokemon to your home with our Wiremon Figure! 🧙‍♂️💫 This digital template is designed with premium quality wire and printed with a high-quality resin 3D printer for stunning details that come to life! 🌟🔥 Perfect for Pokemon fans and collectors looking for a unique and eye-catching decor piece. 🏠✨ Simply print and enjoy the intricate wire design, crafted with attention to detail to bring out the unique features of the Alakazam character. 💡🔍 Upgrade your decor game with this limited edition piece today! 💰💥

FHW: Laxoit pumpkin turret upgrade prototype

FHW_ Laxoit Pumpkin turret v1.2 turret set.stl

Creality E-Fit 5015 Cooling Fan Adapter

I created this adapter to mount a 5015 to the E-fit direct drive extruder kit from Creality.

Prints with no supports and very little filament. Use the existing bolts in the kit to mount the adapter then use M3 bolts to mount the fan to the adapter.

This is tested and works but I am no fluid dynamics expert.

Show me yours if you print one!

@kwerkshop on Instagram

Creality Ender 3 Max power supply reallocator

Meanwell Power Supply.stl

HMG7.2 ADXL345 22.5mm Horizontal Mount.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**


 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**


Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.


So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 


If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.


If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com


If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Elegoo Neptune 2 runout extension

I bought an upgraded extruder and the filament entered from a higher position.  I made this to house the runout sensor and match the height while being able to reuse the m3 screws that come stock for it.

runout sensor enclosure

TFT32 Mount for Ender 3

tft32_mount_ender3_left.stl

2x2020 50mm Hefty Foot

Some time ago I needed to replace fans under mobo and PSU. To do it, I needed 50mm clearance, so I designed that Hefty Feet.

You can use it in 3 ways:
- just slide them in to profile
- bolt to profile with 3x m4 nuts and screws (min lenght 15mm)
- bolt down to surface with 5mm countersunk screws

I printed them with 10% gyroidal infill and pour resin inside with steel shavings filler.

2x2020 50mm Hefty Foot.obj

Ender 3 nozzle wiper 2

A caddy to hold a brush was wiping of the nozzle.

Mounts on the X axis on the right side. In order to used you will need to add extra GCODE to the start of your prints.

Ender 3 nozzle wiper

Axis Reference - Ender 3 Pro

Are you an utter buffoon like myself, and constantly mixing up your axis when manually moving your printerhead?
Set yourself up with a 3D printed axis reference, to completely remove the thinking part about this equation!

Axisbuddy Tentomon - Ender 3 Pro

Are you an utter buffoon like myself, and constantly mixing up your axis when manually moving your printerhead?
Set yourself up with a 3D printed axis reference, complete with a Tentomon to keep your prints company while you go off and work on your other projects!

Would you prefer to set up a Tentomon for other projects?
Feel free to check out my [cleaned up version](https://social.thangs.com/m/256508), based on the Tentomon model from Digimon Story: Cyber Sleuth

upgrade

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Universal High Airflow Aux Fan

View 104 new models

FHW: Laxoit pumpkin turret upgrade prototype

Creality E-Fit 5015 Cooling Fan Adapter

Creality Ender 3 Max power supply reallocator

View 510 new models

Elegoo Neptune 2 runout extension

View 25 new models

2x2020 50mm Hefty Foot

Ender 3 nozzle wiper 2

Axis Reference - Ender 3 Pro

Axisbuddy Tentomon - Ender 3 Pro