Cracked Letters

A.stl

Lactuca Cylinder Vase Medium

The organic forms in the Lactuca Series bear a resemblance to the contours of leafy lettuce. Stare at them long enough and your mind might start seeing strange plants and creatures begin to appear!

See here for video: https://youtu.be/yd4LJx4f3vk 

Other designs in the Lactuca Series:
Lactuca Round Bowl:
Lactuca Cylinder Vase Small: https://than.gs/m/878846 
Lactuca Cylinder Vase Medium:
Lactuca Cylinder Vase Large:


Dual Colour Modular Mushroom Caps (Stochastic)

Cap Surface 1 single colour.stl

Dual Colour Modular Mushroom Caps (Surfaces)

Textured Snap Egg (Circle)

Display only do not print.stl

Heartbeat Creamer

This piece is part of a complete “Heartbeat Tea Set” modelled after Royal Albert “Blossom Time” China. 

See here for video: https://youtu.be/MhM_qACdKDc 

Download the complete set:
Teapot and Lid: https://social.thangs.com/m/710925 
Five Unique Teacups: https://social.thangs.com/m/710931
Fine Unique Heartbeat Saucers: https://thangs.com/mythangs/file/789008 
Fine Unique Heartbeat Plates: https://thangs.com/mythangs/file/789202 
Heartbeat Sugar Bowl: https://thangs.com/mythangs/file/789233 
Heartbeat Creamer: Coming Soon

Links to matching “Heartbeat Vases”:
Small (50mm): https://social.thangs.com/m/697442 
Medium (70mm): https://social.thangs.com/m/697467 
Large (90mm): https://social.thangs.com/m/697493



Morton’s Rolling Knot

Mortons Knot Textured.stl

Heartbeat Vases (For Spiralized Printing)

Heartbeat Spiralize Vase 90mm.stl

Heartbeat Vase (Large)

Imagine your heartbeat rippling outwards and bumping into all the other heartbeats!

This “Heartbeat Vase” is part of a set of three. Models print easily without supports. Inside heights are indicated below.

See here for video: https://youtu.be/vOIxj584jOs 

See here for other sizes in the set:
Small (50mm): https://social.thangs.com/m/697442 
Medium (70mm): https://social.thangs.com/m/697467 
Large (90mm):


Knit Cylinder (Small)

Knitted cylinder containers for those of us that can’t knit.
Small:
Medium:
Large:
See here for video: https://youtu.be/uQI1Cdas2Jg 
See here for Knitted Bowl: https://social.thangs.com/m/304075 


Wavey Numbers

Wavey Numbers Display Do not print.stl

Wavey Letters

Wavey Letters Display Do Not Print.stl

Ripple Vases (Cube)

Ripple Vase Cubes Display only do not print.stl

Thiny vase

A 3D printable vase for flowers and decoration.
Scale as you want.

Enjoy and have fun 3D printing!

Knurled Nightcrawler

This “Knurled Nightcrawler” is part of a series of three textured articulating snakes.

See here for video: https://youtu.be/8fIhzqsQP_k 

These textured articulating snakes use a unique print-in-place ovoid joint to create realistic snake movement. This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

The snakes are 54sm in length but will print easily on a 200mm x 200mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.

These models demonstrate some of the surfacing and texturing capabilities of nTopology.


Bubble Boa

This “Bubble Boa” is part of a series of three textured articulating snakes.

See here for video: https://youtu.be/8fIhzqsQP_k 

These textured articulating snakes use a unique print-in-place ovoid joint to create realistic snake movement. This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

The snakes are 54sm in length but will print easily on a 200mm x 200mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.

These models demonstrate some of the surfacing and texturing capabilities of nTopology.


texture

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Cracked Letters

Lactuca Cylinder Vase Medium

Dual Colour Modular Mushroom Caps (Stochastic)

Dual Colour Modular Mushroom Caps (Surfaces)

Textured Snap Egg (Circle)

View 10 new models

Morton’s Rolling Knot

View 10 new models

Heartbeat Vase (Large)

Knit Cylinder (Small)

Wavey Numbers

Wavey Letters

Ripple Vases (Cube)

Thiny vase

Knurled Nightcrawler

Bubble Boa