Baby Springo

This tiny Springo is more 'springy' than the larger ones. It has the same tolerances as my larger models so it's a good quick test before printing larger Springos.

Ideally, you should not scale this model and print at .15mm layer height. I carefully split the layers apart using an X-acto knife. They should come apart quite easily without having to cut through plastic, you are simply pulling apart the weak bond between the rings. 

If your layers aren't separating, try lowering print temp./increasing print speed. Quick layer cooling helps so use your cooling fan at 100%.

2+ shells, 100% infill.

Skeletor Havoc Staff | No AMS, No Support, No Glue

Havoc Staff 3MF (For Bambu Printers).3mf

See No Evil Frog

OnlyFrogs_006.3mf

PLEIADES Soap Cover // 57x83x103

PLEAIDES Soap Cover 57x83x103.stl

X-ACTO Knife (Gripster) Cap

A blade cover for the [X-ACTO Gripster Knife](https://amzn.to/405Yv5V) and the [No 11 Classic Fine Point Blade](https://amzn.to/3tk2EYC). This model is a personal favorite for its rubberized barrel that provides comfort and control.

This print has a small footprint, so I recommend printing with a wide brim for better bed adhesion, but that will ultimately depend on your printer.

This cap can also be softened with a heat gun to change the size to fit a regular metal X-Acto knife and some other models.



Photographed model was printed with [MatterHackers Yellow PRO Series PLA](https://bit.ly/PRO-PLA)

Mini Christmas Dragon Keychain

MiniMonster#1SANTAhatKeychain.stl

Dastardly Dovetail Box (Small)

smallDD_Bottom.stl

75mm PERSPEKTIVA Cube

PERSPEKTIVA_Cube_75mm.stl

EZPZ Phone Stand

A simple and effective phone stand with a built in passive amplifier, compatible with phones up to 13mm thick. Works in vertical and landscape orientation.

Super easy to print using your default settings. No supports required.

Photographed model printed using [Qidi CF-Nylon Filament](https://amzn.to/403NySk)

PLEIADES Tealight // Short

Tealight 0.8 vase Short.stl

Auxetic Cubes // 18mm 4x4 Stacked

Auxetic Cubes 18mm 4x4 stack.stl

SIMPLE FLEXI COBRA - SUPPORT FREE - PRINT IN PLACE

CobraFlexiLong.stl

Scooby | Supportless

100_Scooby_PIXELandPLASTIC_RM.3mf

multifaceted bowl 3 (large facets)

Simple faceted bowl
To be printed in vase/spiralise mode

She-Ra Sword of Protection | No AMS, No Support, No Glue

Fossil Grey.stl

BK Ash Tray Coin Tray

BK Ash Tray.stl

F@CK OFF Bloody Shelf Sign

FuckOff_BloodySign.stl

Christmas Baby Axolotl - Mini Monster #2

MiniMonster2SantaHatBabyAxolotlPrintStart3D.stl

Auxetic Cubes // 30mm 6x6

Auxetic Cubes 30mm 6x6.stl

Celtic Broadsword | No AMS, No Support, No Glue

support free

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Baby Springo

Skeletor Havoc Staff | No AMS, No Support, No Glue

See No Evil Frog

PLEIADES Soap Cover // 57x83x103

X-ACTO Knife (Gripster) Cap

Mini Christmas Dragon Keychain

Dastardly Dovetail Box (Small)

75mm PERSPEKTIVA Cube

EZPZ Phone Stand

PLEIADES Tealight // Short

Auxetic Cubes // 18mm 4x4 Stacked

SIMPLE FLEXI COBRA - SUPPORT FREE - PRINT IN PLACE

Scooby | Supportless

multifaceted bowl 3 (large facets)

She-Ra Sword of Protection | No AMS, No Support, No Glue

BK Ash Tray Coin Tray

F@CK OFF Bloody Shelf Sign

Christmas Baby Axolotl - Mini Monster #2

Auxetic Cubes // 30mm 6x6

Celtic Broadsword | No AMS, No Support, No Glue