Aliens(1986) is different from Alien(1979) in many ways. If Alien(1979) was a horror/thriller, Aliens(1986) is closer to an action movie. There are various equipment and vehicles that make this action fun, and the APC (M577 Armored Personnel Carrier) is the most active among them.
As an Alien fan, I really wanted to make this, and this time I made it.

I used a custom made support for the body part. It can be easily removed.
The rear cannon, which moves along the rail, must be attached to the rail before assembling the body.
In addition, the sliding door on the side must also be connected before assembling the body.

If there are any loose parts, please use glue to attach them.

Please refer to the video for detailed printing and making process.
Printing and assembling video - https://youtu.be/72ZsP_DlRdM?si=7LhbOkMfLi01cQ6-

1 : 48 scale
Largest part in printing, size = X 135mm, Y 175mm, Z 48mm, After full assembly size= X 70mm, Y 195mm, Z 60mm

Alien APC

GOODesign_Alien_APC_Body.stl

Get commercial license and download newest models by GOODesign cheaply- https://www.patreon.com/goodesign

This design is not for commercial use and should not be printed for sale.

The Star Wars AT-AT I previously designed gained great popularity. Since then, while working on various other designs, I started to think about how I could improve the AT-AT I had created.
So this time, I made several enhancements and designed the AT-AT Version 2.0.
In particular, I made significant improvements to the head section, allowing the lower part with the laser to move back and forth, just like in the movies.
Enjoy this newly improved, high-quality Star Wars AT-AT, featuring print-in-place technology!

Check out the video below for a step-by-step guide on how to put it together!

https://youtu.be/GytCs7XrmQQ
https://youtu.be/GrJVu2Va14s
https://youtu.be/hv90qwgkzS8

1 : 144 scale

Size, X 70mm, Y 191mm, Z 157mm

Print-in-place Articulated STARWARS AT-AT Ver2.0

GOODesign_Print-in-place_Articulated_STARWARS_AT-AT_Body.stl

The Millennium Falcon, which was extremely popular with makers, has been improved by color-separating several parts this time.
This Millennium Falcon that I designed was inspired by pizza slices and can be completed with high quality by dividing it in a way that is suitable for printing with an FDM 3D printer. This new approach to the shape of the Millennium Falcon has been popular with many makers.

However, it felt monotonous because it was printed in only one color, so this time I color-separated it to make it more complete.
You can check the entire assembly process in the video of version 1.0.

Version 1.0 Videos
https://youtu.be/1aUt0VfaD8U
https://youtu.be/yWF1ytgD-sk
https://youtu.be/TjLLNn7Cg6c

I hope this 2.0 version will continue the popularity of version 1.0.

sf movie

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Alien APC

Print-in-place Articulated STARWARS AT-AT Ver2.0

Millennium Falcon Ver 2.0