Collared Dickerson Lizard — Fully Articulated Flexy Reptile Pre-Painted + Optional 6mm Glass Eyes

collard_lizard.stl

Serpentes nTopologus Hexhoneycombus

This “Serpentes nTopologus Hexhoneycombus” is part of a series of three articulating snakes demonstrating various ways that nTopology can be used to design unique topology within complex designs. It incorporates the gyroid TPMS into the body of the snake.

See here for video: https://youtu.be/z7fLPr0367s 

These topology snakes use a unique print-in-place ovoid joint designed to maximize available volume and surface area for other design elements.

This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

These snakes are 72cm in length but will print on a 220mm x 220mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.


See here for video of similar textured snakes: https://youtu.be/8fIhzqsQP_k 

See here for stable downloads of textured snakes:
Bubble Boa: https://thangs.com/mythangs/file/62591 
Voronoi Viper: https://thangs.com/mythangs/file/62593 
Knurled Nightcrawler: https://thangs.com/mythangs/file/62592


SIMPLE FLEXI COBRA - SUPPORT FREE - PRINT IN PLACE

CobraFlexiLong.stl

Snake and Rattlesnake

Snake_v1_Curled.stl

Death Cap Mushroom

Deathcap Mushroom.3mf

Articulated Agama Lizard | Pre-Painted + Optional 6mm Glass Eye Version

agama_lizard.stl

CUTE DRINKING FROG COUPLE! - PEN HOLDER #FunctionalArt

FrogSTL.stl

Turtle figurine

Turtle figurine low detail.stl

Dragon eggs set 3 | STL files

EGG 011.stl

Reptile Mask

Serpentes nTopologus Voronoicus

This “Serpentes nTopologus Voronoicus” is part of a series of three articulating snakes demonstrating various ways that nTopology can be used to design unique topology within complex designs. It incorporates the gyroid TPMS into the body of the snake.

See here for video: https://youtu.be/z7fLPr0367s 

These topology snakes use a unique print-in-place ovoid joint designed to maximize available volume and surface area for other design elements.

This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

These snakes are 72cm in length but will print on a 220mm x 220mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.


See here for video of similar textured snakes: https://youtu.be/8fIhzqsQP_k 

See here for stable downloads of textured snakes:
Bubble Boa: https://thangs.com/mythangs/file/62591 
Voronoi Viper: https://thangs.com/mythangs/file/62593 
Knurled Nightcrawler: https://thangs.com/mythangs/file/62592


Articulated Chameleon 001 - STL File - Reptile 

CHAMELEON 001.stl

Articulated keychain snake 004 - Print in place - No supports - 3mf - STL

ARTICULATED SNAKE KEYCHAIN 004 - WITH RING.stl

LFC Happy Turtle Sculpt

LFC Happy Turtle Sculpt.stl

Hermit crab pool with bubbler.stl

This Hermit Crab pool is an upgrade to my last time, this time it has a hook up for a bubbler, I hope your pets enjoy it

reptile

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Collared Dickerson Lizard — Fully Articulated Flexy Reptile Pre-Painted + Optional 6mm Glass Eyes

Serpentes nTopologus Hexhoneycombus

SIMPLE FLEXI COBRA - SUPPORT FREE - PRINT IN PLACE

Snake and Rattlesnake

Death Cap Mushroom

Articulated Agama Lizard | Pre-Painted + Optional 6mm Glass Eye Version

CUTE DRINKING FROG COUPLE! - PEN HOLDER #FunctionalArt

Turtle figurine

Dragon eggs set 3 | STL files

Reptile Mask

Serpentes nTopologus Voronoicus

Articulated Chameleon 001 - STL File - Reptile

Articulated keychain snake 004 - Print in place - No supports - 3mf - STL

LFC Happy Turtle Sculpt

Hermit crab pool with bubbler.stl

Love Lizard

Blob Turtle - Articulated Fidget Toy

Stretchy Snake

PRINT-IN-PLACE CHAMELEON (WITH MOVING EYES)

Articulated Crystal Snake 006