Red Iron Spider Mask

onepieceNoeyes.stl

"Cheezy Pen Holder" - (shhh its about cheese heads) - Read Description

---

📝 Description

---

Behold the "Cheezy Pen Holder" – the wedgiest and wittiest desk accessory you'll ever need! Crafted with the precision of a cheese connoisseur and seasoned with just the right amount of humor, this 3D model promises to add a dash of gouda goodness to your workspace.

Looking for the perfect spot to park your pens? Say cheese! This delightful pen holder is shaped like a wedge of Swiss cheese, complete with the iconic holes that are practically begging for your pens to dive right in like cheese divers at the Olympics.

Picture this: your pens nestled in the embrace of Swiss holes, like they're on a relaxing vacation in the Swiss Alps, sipping cheese fondue by the fire. It's a taste of pen holder paradise that's sure to leave your colleagues cheddar with envy!

But wait, there's a twist that's sharper than a cheddar knife! The "Cheezy Pen Holder" doesn't just hold your pens; it holds the cheesiest writing utensils you can find! From pens with pun-tastic names like "Brie-lly Awesome" to "Cheesus Saves," this holder is the mecca of cheesy wordplay.

So, if you're ready to bring some wit and clever humor to your workspace, the "Cheezy Pen Holder" is your prime choice. It's the Swiss army knife of pen holders – practical, stylish, and full of cheesy charm. Get yours now, and let the puns flow like a never-ending cheese fountain!

Get ready for a desk that's more entertaining than a stand-up comedy show and cheesier than a pizza commercial. With the "Cheezy Pen Holder" by your side, every day will be a cheddarific adventure! Embrace the wedge, embrace the puns, and embrace the laughter! 🧀😄
&nbsp;

---

🖨️ Printing Tips

---

.2 layer height looks nice.  I used eSun Yellow PLA https://amzn.to/45aaq5L for this one.  I do not have an affiliation with eSun.  
&nbsp;




&nbsp;

---

⚖️ License

---

**Free For Personal Use - Commercial Restricted License (with subscription)** 🟠

🔄 *Attribution* | 🎨 *Remix* | 💼 *Free for Personal Use + Resale with Subscription*

&nbsp;

---

👥 Community

---

🌟 *Adore this model? Show some love to Rob, the one-man creative force behind Makers Mashup, and dive into more maker adventures!* 🌟

🎥 **Watch & Subscribe on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1)** - Assembly videos, tutorials, and much more. Don't miss out on new content!

🔗 **Join the Creative Journey on [Thangs.com](https://www.thangs.com)** - Follow me for the latest models and exclusive content.

🤝 **Engage with the [Community Discord](https://discord.gg/ZDKq5N2)** - Get help and advice from a large and vibrant community. Build anything with the support of fellow makers!

📲 **Get Social with Makers Mashup** - 🐦 [Twitter](https://twitter.com/MakersMashup) | 📸 [Instagram](https://www.instagram.com/makers_mashup/) | 👍 [Facebook](https://www.facebook.com/MakersMashup) - See work in progress, prints, and more.

❤️ **Support the Channel & Creator** - Your support makes a difference!
   - 🤝 [Patreon](https://www.patreon.com/makersmashup) – Support my ongoing work and get access to exclusive content!
   - 💸 Drop a tip: [Ko-fi](https://koji.to/k/8E9J)
   - 🛍️ Shop on Amazon? Click [this link](https://amzn.to/429HusI) before your next purchase. It helps the channel at no extra cost to you!

🔓 **Unlock Incredible Benefits**
   _with a Paid Subscription on [Thangs.com](https://www.thangs.com), or Select Tiers on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1) or [Patreon](https://www.patreon.com/makersmashup)_

   - Resale Abilities
   - Early Access to Models
   - Request New Models
   - Exclusive Discord Channel for Supporters with Behind-the-Scenes Content

🚀 *Let’s build, share, and grow together!* 🚀



String Heart Earrings

Earring DISPLAY ONLY.stl

Loopy Vase

This is a loopy vase that is designed to be printed at either 0.6mm or 0.3mm layer height and so can be printed with a standard 0.4mm or larger 0.8mm nozzle.

The picture shows it printed with the larger nozzle.

Print in vase mode

Garrock (Gary + The Rock)

Just a fun mashup I slung together. No supports needed! Remixed from these two files: 
1) https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson
2) https://www.thingiverse.com/thing:2579868

**Printing, Assembly & Post Processing**
									
**FDM or Resin:** FDM or resin			
**Scaling:** Current Size: 64 x 65 x 100. Scale up or down as you please!
**Supports:** No supports needed.
**Nozzle Size I Used:** 0.4			
**Infill/Perimeters:** 15% with 2 perimeters 
**Layer Height:** I used 0.20, but any layer height should be fine.	

**This design is uploaded with a non-commercial license. Purchasing this file does not grant you the rights to sell commercially.

If you would like to consider gaining access to ALL of the models and the rights to print and sell, you can check out my Patreon at https://www.patreon.com/thinair3D				

ezio-auditore-REMIX.3mf

remix of https://www.thingiverse.com/thing:4098773

- I cleaned up and solidified the base.
- Significantly reduced the polygon count as it was way too high.
- corrected bad meshes.
- increased height to 250 mm (you can print smaller if you want. 

NOTE: I recommend this only for personal use based on my understanding of how the original was acquired. 



Anycubic Vyper Super Tray (Super Spiffy)

The Anycubic Vyper has a magnetic storage tray in its base... and mine had backwards magnets. Instead of prying them out, I redesigned the tray from scratch.

This tray replaces the stock version and perfectly fits every accessory included with the Vyper with room for spares.

The stock tray's flimsy foam holds the adorably tiny flush cutters, wrenches, two included nozzles, cleaning pin, and hex key set. 

This version adds slots for the SD card reader, three SD card, nine nozzles in three sizes, and the scraper spatula. The tools are easier to use, too - the hex keys get individual recesses, and the cleaning pin is out of the test tube and into a magnetic tray with protective pocket. It still fits all the other supplies, and it looks goooood.

Print with a brim and supports on build plate only. The bottom is tilted upwards - lay it flat to print faster with less material, but compromise the appearance.

Glue in three 6x2mm magnets - one in the cleaning pin tray and two on the back. Take care to orient the back magnets so they attract the magnets in the base!

This is licensed Creative Commons 4.0 NC-BY. Download the original Fusion 360 file at https://a360.co/3gikQJg.

6x2mm magnets (with 298 spares): https://amzn.to/3gju73H

q

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Red Iron Spider Mask

"Cheezy Pen Holder" - (shhh its about cheese heads) - Read Description

String Heart Earrings

Loopy Vase

Garrock (Gary + The Rock)

ezio-auditore-REMIX.3mf

Anycubic Vyper Super Tray (Super Spiffy)

Gothic Library No.2 Multi Clicker Keychain Fidget Toy Bundle

Christmas Chunkpool and Chunkerine - Marvel Kit | No Supports, No AMS, No Glue

Skull Planter Pot by MODERN MACHINE

4x1x3.5 LU - Labelled - Magnetic - Column Divided - Simple Multibin Drawer

Tiny Squid

Xbox & Switch Pro Controller Pillow

Textile Finial Ornament - Knit

Dark Dryad Bust (Pre-Supported)

Rimuru question mark

rechess.STL

Cheerleader Goose Gear for Porch Goose

Kirby Yoda - Single Color

12.5 mm - Vertical Dual (DS Part A) - Small Command Strip Mount