Geometric planter

little geometric planter printed upside down, no supports.

Face Pot

Pot with a minimalist face design.
Scale to size and print with preferred settings.

Teardrop Pod Plain

This Teardrop Pod can be used to hang plants, moss, or any other small object. 
This version is designed for FDM printing. There are three similar versions that feature delicate lattice structures and are designed for resin printing.

See here for video of Plain Teardrop Pod: https://youtu.be/2bUXOdHXvWI 

Links for resin models:

Video of resin models: https://youtu.be/ZT0Dhcexz80 

Download links for resin models:
Teardrop Pod FCC Lattice: https://than.gs/m/889694 
Teardrop Pod Reentrant Lattice: https://than.gs/m/889700 
Teardrop Pod Truncated Cube Lattice: https://than.gs/m/889711 


Owl planter with tree stand

Owl.stl

Planters and Pots

Gracewindale-planter-2.stl

Teardrop Pod (Truncated Cube Lattice)

This Teardrop Pod can be used to hang plants, moss, or any other small object. It is part of a series of three featuring delicate lattice structures that use very little material to print. These models are designed for resin printing.

See here for video: https://youtu.be/ZT0Dhcexz80 

Download the full set:
Teardrop Pod FCC Lattice: https://than.gs/m/889694 
Teardrop Pod Reentrant Lattice: https://than.gs/m/889700 
Teardrop Pod Truncated Cube Lattice:

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 8K with Phrozen Dental Study white resin.


Teardrop Pod (Reentrant Lattice)

This Teardrop Pod can be used to hang plants, moss, or any other small object. It is part of a series of three featuring delicate lattice structures that use very little material to print. These models are designed for resin printing.

See here for video: https://youtu.be/ZT0Dhcexz80 

Download the full set:
Teardrop Pod FCC Lattice: https://than.gs/m/889694 
Teardrop Pod Reentrant Lattice:
Teardrop Pod Truncated Cube Lattice:

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 8K with Phrozen Dental Study white resin.


Music note planters #JuneTunes

music symbol planter.stl

Planter castle

**A castle inspired planter with water drainage via the moat.**

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 153 x 157 x 102 mm with a inner size of ca 96x96x90mm and a wall thickness/small feature diameter of 2mm minimum
- Downscaling (99% – 61%): works great
Minimum size (60%):  62 x 65 x 61 mm with a inner size of ca 58x58x54mm and a wall thickness/small feature diameter of 1.2mm minimum
- Everything smaller than that is not tested but maybe possible :D

Don't forget to post your makes!

**Print settings**
Material usage (100% scale): 200g
Print time: 16h (100% scale): 16h

Material usage (60% scale): 50g
Print time: 16h (60% scale): 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, callibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

Castleplanter.stl

D' Bomb Stash container, succulent Planter, pen cup, or desk ornament

Bomb Stash Container #1 v1.stl

Planter

Planter.stl

Cat Pot

Planter “Extra”

Planter_V2_multi_details.stl

Fire Hydrant Planter

I made this little fire hydrant planter for some succulents or herbs.  Stands 185mm tall. Bottom is hollowed for material reduction. There are drainage holes in the bottom that are designed to leak out of the front "cap" for extra busted city life feel.

Print standing upright with support angle at 55 degrees or above for best results. 

#OutdoorThangs

Mirror Plant Stand / Table (Core Setup) - part of the Reflection Stand System

Full Model

Honeycomb Planter

A 3D Printable Honeycomb Planter.

Print time: 4.5 - 5.5 hours
Size: 9.5 x 6.6 cm (diameter x height)
Weight: 65 grams

If you have questions, please let me know. I am happy to help.

Happy printing 

3D printing settings

0.25mm layer height
0.6mm layer width / wall thickness
2 walls - 10% infill
40mm/sec print speed - 120mm/sec travel


Tea Set for Remixing (Teacup and Saucer)

Teacup for remixing.stl

Self-Watering Planter Addon

This is a fantastic way to turn a normal plant pot into a self-watering plant pot. To set this up, just push it into the soil and put water into it. I'd really appreciate some feedback while you're here because it would help me know what you want to see next.

planter

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Geometric planter

Face Pot

Teardrop Pod Plain

Owl planter with tree stand

View 143 new models

Teardrop Pod (Truncated Cube Lattice)

Teardrop Pod (Reentrant Lattice)

Music note planters #JuneTunes

Planter castle

D' Bomb Stash container, succulent Planter, pen cup, or desk ornament

Planter

Cat Pot

View 31 new models

Fire Hydrant Planter

View 10 new models

Honeycomb Planter

Tea Set for Remixing (Teacup and Saucer)

Self-Watering Planter Addon

View 28 new models

View 10 new models